Butterfly Hueforge

Project: Butterfly_01.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 119.13x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.46mmThe Max allowed Thickness is 2.38mm and the Actual Thickness is 2.26mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.1 #00ae42 * PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 #c00d1e * PLA BambuLab Basic Red Transmission Distance: 3.7 #fce300 * PLA BambuLab Basic Yellow Transmission Distance: 5.2 #0086d6 * PLA BambuLab Basic Cyan Transmission Distance: 2.4 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.52mm) swap to BambuLab Green At layer #11 (0.76mm) swap to Black At layer #13 (0.88mm) swap to Red At layer #19 (1.24mm) swap to Yellow At layer #23 (1.48mm) swap to Cyan At layer #27 (1.72mm) swap to Jade White for the rest.