Buzz Lightyear Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Pro Dark Purple Transmission Distance: 0.3 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Purple At layer #10 (0.88mm) swap to White At layer #15 (1.28mm) swap to BambuLab Green for the rest.