Buzzer systeme with central

A buzzer in multiple printable pieces with a central made for an esp32 and female usb to jst custom cables to the buzzer.

the buzzer base hase a cutout made for a presence sensor cap, the square ones, i put a led inside so the whole cap changes color when pressing the buzzer.
the buzzer base is made to fit a standard push button switch (https://cdn.sparkfun.com/assets/parts/2/6/2/9/09190-03-L.jpg)

you will need springs and super glue to put the main shaft on the mushroom and the spring shafts.

you will need to put the small shafts, the springs, put the mushroom on the base then instert the main shaft from inside the base into the mushroom, the main shaft will keep the assembly together so the mushroom doesn not jump off.

inside the mushroom base you can glue the cables for the led and to the jst connector. on the base of the buzzer you can connect your button and glue the cables to the base.

i used usb extensions, cut the female part for the centrat, put a jst connecter 4pin to t