Thingiverse
BvS Batman
von Spookz0r
236
Downloads
193
Likes
0
Makes
Forgot to publish this... Uploaded it in January 2020, and moved on with other stuff so if something strange happens when you print it I'll probably not fix it :P
Batman V Superman inspired Batman figure. Batfleck is by far the coolest live action Batman and I needed something to stand next to my Superman model (https://www.thingiverse.com/thing:2805274).
Modelled in Mudbox and 3Ds max, rigged in Maya.
Either print the full version with a lot of support, or print the splitted version with a lot of support. Use tree support to reduce the wasted material.
I printed it in the scale that is uploaded but also tried a small print (5 cm high) just to try and that worked as well (of course with zero details but everything was thick enough to print on a 0.4mm nozzle).
If you're printing the full version that is all you need.
If you're printed the splitted version you will have to glue Part 1 and Part 2 together and then glue Batmans butt and right foot on the wall.
Pro-tip
Batman V Superman inspired Batman figure. Batfleck is by far the coolest live action Batman and I needed something to stand next to my Superman model (https://www.thingiverse.com/thing:2805274).
Modelled in Mudbox and 3Ds max, rigged in Maya.
Either print the full version with a lot of support, or print the splitted version with a lot of support. Use tree support to reduce the wasted material.
I printed it in the scale that is uploaded but also tried a small print (5 cm high) just to try and that worked as well (of course with zero details but everything was thick enough to print on a 0.4mm nozzle).
If you're printing the full version that is all you need.
If you're printed the splitted version you will have to glue Part 1 and Part 2 together and then glue Batmans butt and right foot on the wall.
Pro-tip
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
