Thingiverse
Cable Chain
von jotalinux
20
Downloads
8
Likes
0
Makes
My approach aimed to solve three situations that I disliked in the models I saw:
1. The angle that allows the chain to bend has been changed so that the chain fits in a smaller space, as shown in the photo.
2. The part is divided into two parts to facilitate cable assembly. In the end, each element is closed with the clips.
3. Each element has a slot to insert a piece of TPU filament, to lower noise during movement.
The clips can be fixed with a piece of PLA filament of equal length to the width of the element or alternatively the pieces can be modified so that the fixing system is of the "click" type. However, I think the first solution is more robust.
Suggestions are welcome
That's all
1. The angle that allows the chain to bend has been changed so that the chain fits in a smaller space, as shown in the photo.
2. The part is divided into two parts to facilitate cable assembly. In the end, each element is closed with the clips.
3. Each element has a slot to insert a piece of TPU filament, to lower noise during movement.
The clips can be fixed with a piece of PLA filament of equal length to the width of the element or alternatively the pieces can be modified so that the fixing system is of the "click" type. However, I think the first solution is more robust.
Suggestions are welcome
That's all
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
