Cable Clip

A compact cable clip that keeps charging leads and peripherals neatly routed on your desk, shelf, or charging station. The model is oriented to print flat on the base and is designed to avoid supports on most printers for a quick, clean result.HighlightsPrints flat • usually no supportsSmall footprint • low material useFlat base suited for double-sided tape (3M/VHB) or hot glueRounded entry for easy cable drop-inMinimal look that blends in at home or the officeHow to useClean the mounting surface (isopropyl alcohol works well).Apply a strip of double-sided tape to the flat base.Press the clip in place and route the cable through the slot.Recommended print settingsLayer height: 0.20 mmPerimeters: 3Infill: 15–20% (grid/gyroid)Material: PLA/PLA+ (PETG if you want extra toughness)Orientation: base down • brim not needed in most casesTips & customizationIf your cable is a bit tight/loose, scale XY by 5–10%.For semi-permanent mounting, use VHB tape; for temporary, use poster tape or hot glue