Thingiverse
cable slicer
por shinondon
66
Descargas
46
Likes
0
Makes
lengthwise cable slicer for network or other 12mm and less cables. The blade adjusts on the x and y so you can get a angle and depth on the blade for best slicing. Accepts utility and straight edge blades- maybe other blades but i have not tested.
There are two bolts that push into the upper half of the blade to keep it in place
In hind sight, the holes for the nutserts could be bigger but it is plastic....
UPDATE: after the first iteration, i added slots in the body to separate the shells and to adjust the blade with another tool if needed
Added a circumference slicing hump to the blade area which looks like a slight hump in the bottom.
There are two bolts that push into the upper half of the blade to keep it in place
In hind sight, the holes for the nutserts could be bigger but it is plastic....
UPDATE: after the first iteration, i added slots in the body to separate the shells and to adjust the blade with another tool if needed
Added a circumference slicing hump to the blade area which looks like a slight hump in the bottom.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
