CableManager

von muzz64 · Computer

0 Downloads

1.9k Likes

0 Makes

If your device / Ethernet / power cables all too often ends up in a tangled mess then do yourself a favour and print a CableManager! This simple device prints in around 15 minutes (on a MakerBot), uses very little filament, and quickly clips into place on your devices power cable. Refer to the images for the recommended sequence. Once installed in this order you can unclip the length of cable required from each end to manage the length of cable as required... and secure it in a tidy coil when all clipped back in place. A quick and easy solution that keeps your devices power cable under control. At standard scale the CableManager works with 6.75mm diameter power cables which are common for laptop power supplies. Scale up/down as required to suit other common cable sizes. A second .stl has been added that is designed to suit Ethernet cables and functions in exactly the same way. For example, with Ethernet Cables decrease the X/Y scaling by 22% (78% of standard) to use with 5.25mm cab

computer print cable easy handy laptop mobile office simple storage tidy travel unique organisation useful designer RJ45 ethernet connector luggage smart power device cord practical network clever potrable

Kategorie

Computer

Quelle

MyMiniFactory

Veröffentlicht

20.03.2017