Thingiverse
Cactus Passthrough
von Devilish3DPrints
51
Downloads
226
Likes
1
Makes
This is a simple, cactus passthrough! Print for lots of fun!
Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.
**Main settings: **
1) .2mm layer height.
2) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
3) No supports
4) 15% Gyroid infill for both objects.
5) 2 perimeters(walls).
6) Colour change at layer 30.20(if you're following step 1).
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.
**Main settings: **
1) .2mm layer height.
2) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
3) No supports
4) 15% Gyroid infill for both objects.
5) 2 perimeters(walls).
6) Colour change at layer 30.20(if you're following step 1).
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Devilish3DPrints veröffentlicht auch auf
32 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
