Thingiverse
Cactus Passthrough
51
Download
226
Likes
1
Makes
This is a simple, cactus passthrough! Print for lots of fun!
Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.
**Main settings: **
1) .2mm layer height.
2) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
3) No supports
4) 15% Gyroid infill for both objects.
5) 2 perimeters(walls).
6) Colour change at layer 30.20(if you're following step 1).
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.
**Main settings: **
1) .2mm layer height.
2) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
3) No supports
4) 15% Gyroid infill for both objects.
5) 2 perimeters(walls).
6) Colour change at layer 30.20(if you're following step 1).
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Devilish3DPrints pubblica anche su
33 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
