Thingiverse
Caddx EOS Mount
von shaiss
20
Downloads
22
Likes
0
Makes
CAD File @ https://bit.ly/2Be3ICe
I replaced the stock Mantis85 camera with a caddx EOS2 and needed a new mount, so I designed this in onshape.
You'll need an M2x10mm or so and you can use this with the stock mantis camera mount. The idea is that it pinches the camera body, just like the original.
Camera does stick out a bit more than the original which means nothing in view, but becareful with a head on crash. I might fix this in the next version if time allows as the camera only needs to move back 2-3mm. you can also just push the camera back a bit as you're tightening the clamp to reses the lens a bit.
I replaced the stock Mantis85 camera with a caddx EOS2 and needed a new mount, so I designed this in onshape.
You'll need an M2x10mm or so and you can use this with the stock mantis camera mount. The idea is that it pinches the camera body, just like the original.
Camera does stick out a bit more than the original which means nothing in view, but becareful with a head on crash. I might fix this in the next version if time allows as the camera only needs to move back 2-3mm. you can also just push the camera back a bit as you're tightening the clamp to reses the lens a bit.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
