Thingiverse
Camera for printer observation
par tcroonen
8
Téléchargements
6
Likes
1
Makes
This is a print observation camera mount. It contains a 2MP USB camera module. The camera can be aligned by a ball joint. The whole assemble is mounted on a movable arm with a printer specific holder.
The camera housing is designed for a IMX179 USB 2.0 camera module. It is a 8 Megapixel Sensor with an 145° angle.
You can find this camera here:
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/kameras/usb-2.0-hd-kameramodul-8-megapixel-imx179-sensor-145-176-mikrofon?c=137
Artikel-Nr.: USBCAM-IM1
EAN: 614961951617
The ball joint is a remake of this thing - Open Source Universal Ball Joint
https://www.thingiverse.com/thing:4739696
The arm I used is taken from a clamp holder with 1/4" and 3/8" thread.
https://www.amazon.de/gp/product/B07RZR539D/ref=ppx_yo_dt_b_asin_image_o08_s00?ie=UTF8&psc=1
You additionally need some screws 2.6*8 and 2.6*10
The camera housing is designed for a IMX179 USB 2.0 camera module. It is a 8 Megapixel Sensor with an 145° angle.
You can find this camera here:
https://www.berrybase.de/raspberry-pi/raspberry-pi-computer/kameras/usb-2.0-hd-kameramodul-8-megapixel-imx179-sensor-145-176-mikrofon?c=137
Artikel-Nr.: USBCAM-IM1
EAN: 614961951617
The ball joint is a remake of this thing - Open Source Universal Ball Joint
https://www.thingiverse.com/thing:4739696
The arm I used is taken from a clamp holder with 1/4" and 3/8" thread.
https://www.amazon.de/gp/product/B07RZR539D/ref=ppx_yo_dt_b_asin_image_o08_s00?ie=UTF8&psc=1
You additionally need some screws 2.6*8 and 2.6*10
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
