Camera head - Low height

Tripod head with one ball bearing. For horizontal movement is used a type 608ZZ.

Bearing parameters for 608ZZ(Reprap printer, etc, price 1.3 euro):
Outside diameter(OD) = 22 mm
Inside diameter(ID) = 8 mm
Height(H) = 7 mm

Fixing horizontal position:
- 1x M4 length=25mm, hexagonal head
- 1x M4 nut

Fixing vertical position:
- 1x M4 length=55 mm
- 1x M4 nuts for handle
- 1x Washer(H=1.2 mm, OD=15mm, ID=4.3mm) for handle side
- 2x Serrated lock washer for M4(for one end of the screw = the head of the screw, for another end of the screw = a gap between vertical & horizontal head part)

Fixing bearing inside head:
- 2x M4 length=15mm

Handle:
- 1x M5 length 140 mm
- 1x M5 nut

Ball bearing 608ZZ:
- 1x M4 length 25mm with hexagonal head
- 1x M4 nut for bottom fixing.
- 2x Washer(H=1.2 mm, OD=15mm, ID=4.3mm). One for screw head on the bearing another for the other end of the screw.

For better friction use a small pieces of rubber, silicone rubber etc. between