Thingiverse

Camera Light Ring (Triangle)

by elhooty

13 Downloads

11 Likes

0 Makes

Light Ring, (Triangle) using LED Strips designed for my Nikon D3200, Nikon DX 18-55mm VR Lens. using Standard 10mm Wide Dim-able LED Strip. Using 3, 10cm sections soldered together and attached to a dim-able 12v power supply. again to get my setup you are going to have to do some soldering i suggest you do the measuring and soldering before you attach to the triangle as the plastic will definitely melt. I also used hot glue to insulate the leads and help secure to base, the glue on the strips is sticky but not that sticky.

May fit loose i used a strip of blue painters tape layered in the inside to make it fit more snug to the lens.

camera camera accessory D3200 filming LED light led mount led strip light light ring Light Triangle lighting Nikon Nikon D3200 video camera camera accessory D3200 filming LED light led mount led strip light light ring Light Triangle lighting Nikon Nikon D3200 video

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Camera Light Ring (Triangle)

Add to Collection