Camera Tripod

I wanted a small but stable tripod for my action cameras, and something that didn't cost a fortune. Total price was less than $12 for bolts and the aluminium legs. I printed the feet and stop in TPU, and you will just need to clone your tripod foot so you have 3. The ally tubing can be found at most hardware stores and is 10mm diameter. For the head I found most mounts were of variable width so I left the head mounting posts with a little room and just use washers in there to close up the gap a little. All bolts were M4 (4mm) with the respective nylon nut for fastening. The right bolt length is 25mm, but I only had 30mm on hand so there is some excess.