carp fish

A carp jumping out the water. Project: carp fish 1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 2.32mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.6 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 2.2 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 4.8This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Gray At layer #16 (1.36mm) swap to Gray At layer #23 (1.92mm) swap to Jade White for the rest.