Cat Bookmark

You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 48.93x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Matte Pine Green Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Pine Green At layer #10 (0.88mm) swap to Yellow At layer #13 (1.12mm) swap to Jade White for the rest.