Cat Face Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.11x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used:     PLA Jayo Black Transmission Distance: 0.3     PLA Jayo Dark Grey Transmission Distance: 3     PLA Geeetech Silver Transmission Distance: 1     PLA Smartmaterials Recicled White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions:     Start with Black     At layer #7 (0.64mm) swap to Dark Grey     At layer #13 (1.12mm) swap to Silver     At layer #21 (1.76mm) swap to White for the rest.