catrina

Project: catrina.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x154.66mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.2mmFilaments Used: PLA Hatchbox White Transmission Distance: 10 PLA Overture Black Transmission Distance: 0.7 PLA PolyLite Wine Red Transmission Distance: 1 PLA BambuLab Basic Silver Transmission Distance: 0.5This print uses 4 unique filamentsSwap Instructions: Start with White At layer #2 (0.24mm) swap to Black At layer #10 (0.88mm) swap to Wine Red At layer #13 (1.12mm) swap to Silver for the rest.