MakerWorld
Hueforge & Lithophane
Voir le modèle
Chamomile Sunset
21
Téléchargements
19
Likes
12
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Orange Transmission Distance: 7PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Jade WhiteAt layer #15 (1.28mm) swap to BlackAt layer #17 (1.44mm) swap to OrangeAt layer #23 (1.92mm) swap to Yellow for the rest.Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!
Corp publie également sur
338 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
