Charizard Hueforge - Pokemon

Projet: Dracaufeu.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm   The Model is 189.89x235mm in size You may print at higher layer heights below the Base Thickness of 1.28mm The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm   Filaments utilisés:      PLA BambuLab Basic Black Transmission Distance: 0.6     PLA BambuLab Matte Ice Blue Transmission Distance: 3.5     PLA BambuLab Basic Red Transmission Distance: 4     PLA BambuLab Basic Yellow Transmission Distance: 5.5     PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments   Instructions de changements:     Commencer par Black     At layer #19 (1.6mm) swap to Ice Blue     At layer #21 (1.76mm) swap to Black     At layer #22 (1.84mm) swap to Red     At layer #27 (2.24mm) swap to Yellow     At layer #29 (2.4mm) swap to Jade White     At layer #31 (2.56mm) swap to Yellow     At layer #32 (2.64mm) swap to Ice Blue     At layer #35 (2.88mm) swap to Jade White pour le reste.