Thingiverse
Cherry MX parametric keycap
von Otso
9
Downloads
4
Likes
0
Makes
Keycap for Cherry MX switches. Fusion 360 file included where the front and back height are parametric, so that that get the correct profile for any row.
Printing:
Printed with bottom down. Support on build plate and a support blocker on the center stem cross hole.
A low layer height, like 0.05mm, will of course give a better result.
Infill does not matter, as all walls are so thin, that they will get fully filled anyway.
I printed with PETG with 0.40mm nozzle on a Prusa I3 MK3S and the result was good.
Printing with a resin printer might be ideal, but I have not yet tried it.
Printing:
Printed with bottom down. Support on build plate and a support blocker on the center stem cross hole.
A low layer height, like 0.05mm, will of course give a better result.
Infill does not matter, as all walls are so thin, that they will get fully filled anyway.
I printed with PETG with 0.40mm nozzle on a Prusa I3 MK3S and the result was good.
Printing with a resin printer might be ideal, but I have not yet tried it.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
![[OLD] Custom OEM Keycap Generator - Stabilized (Fusion 360)](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F34%2Fe9%2Fe9%2Faa%2Fa0%2Flarge_display_spacebar_render_your_custom_text_here.png&w=400&h=300)
![[OLD] Custom OEM MX Keycap Generator - Split Stem (Fusion 360)](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F28%2Fbd%2F9e%2Ffa%2Ff9%2Flarge_display_Windows_Key_Render.png&w=400&h=300)