Chin Shield

Update 01.09.2020;
upon request added a Version for 0.4 and 0.5mm visor

Update 20.08.2020:
upon request from Fips75 created a shield to add a larger and even thicker visor (1,3mm thickness)




Created a mini chin-Shield upon request.


Use at your own risk.

Disinfect the shield before use. Put on protective equipment first (face mask, respirator, goggles, disposable cap), then add the shield.

It is recommended to disinfect the shield before and after use. For complete disinfection, it is recommended to carefully disassemble the shield into individual parts. Submerge them (or spray them) with disinfectant (e.g. IPA 75%) and wait for at least 5 minutes until you dry them with a disposable cloth.


I used a 0.3mm PET Foil as a Visor and the bands of a surgical face mask.
You'll find two different templates in the attached PDF.