Thingiverse

Chisel Sharpening Guide

by DustBunny67

3.8k Downloads

2.4k Likes

4 Makes

Go to Model

I ordered some diamond sharpening stones like these:-
https://www.ebay.com.au/itm/203122872225?hash=item2f4b110fa1:g:70gAAOSwfCtfdEhd
(Actual stone size is 155 x 67 x 6.5mm but there is sufficient wiggle room to accommodate a slightly larger stone.)
so I thought I would make a honing guide to suit them for my chisels.
I didn't like the homing guides that ride on the surface of the stone as they quite easily mar the surface of the stone so this design uses a running guide style chisel holder.
One side of the carriage is set at 25° for the primary bevel, the other side is set to 30° for the secondary bevel.
EDIT:
I have added some alternate bases to suit the most common whetstones.
See: https://www.thingiverse.com/thing:4678840 for details and files.
They are designed to work with the same carriage as this design so you can just print the appropriate base to suit your stone.

chisel diamond DustBunny holder honing honing guide sharpening chisel diamond DustBunny holder honing honing guide sharpening chisel diamond DustBunny holder honing honing guide sharpening

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format