Chucky

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.26x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmSwap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Earth Brown At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to YellowBorder Only Colors from here until the end. At layer #21 (1.76mm) swap to Jade White for the rest.