Clamp

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.https://paypal.me/muddymaker UPDATE July 11th: Added optional reinforcement inserts and a tool for seating them. Print two of each and the inserts tool. I recommend they be printed with 100% infill, preferably out of a stiff polymer, ie, PLA, ABS or carbon fiber filled filament to add rigidity and strength to your clamp. They are in the correct print orientation. They are designed to be a tight friction fit. Hammer them in as far as you can with a hammer and then use the included seating tool to hammer them in the rest of the way. The clamp pictured below is printed in ColorFabb XT-CF20 with 6 perimeters/walls, single perimeter top and bottom and 20% infill. The reinforcement inserts were printed in ABS with 100% infill. It is incredible strong. For maximum strength I recommend printing with a minimum of 6 walls/perimeters and 20% infill, p