Clock 2.0

Mechanical clock

4no M5 bearings 5x4x10MM
1no M6 Bearings 6x4x10MM
4no M3 heated inserts
6mm OD 5mm ID 0.5mm wall brass tube
5mm steel or brass rods to suit
4mm ball chain
M5 machine head bolts for rear of frame
M5 socket head bolts 100mm long (you want only the last 15mm or so threaded as these are cut down to work as the wheel shafts)
M3 screws (to screw shaft onto drive wheel and attach where the pendulum mount goes)
M4 screws for pulley
small amount of weight to put in the Huygens endless loop counter weight
7-14lb weight
6no M5 Shaft collar clamps

Good luck! I did a video about this.
https://youtu.be/fGNYSY_wia0?si=EtBQXIWgOGPLSo5H