Cloud Hueforge

The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio.If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used :PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyTerra Earth Brown Transmission Distance: 0.3PLA PolyTerra Pastel Peach Transmission Distance: 3.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5Swap Instructions:Start with CharcoalAt layer #12 (1.04mm) swap to Blue GrayAt layer #15 (1.28mm) swap to Earth BrownAt layer #19 (1.6mm) swap to Pastel PeachAt layer #23 (1.92mm) swap to Ivory White for the rest.