Cloud Strife

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 191.67x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.9mm and the Actual Depth is 1.5mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Pure Yellow At layer #13 (1.12mm) swap to Jade White for the rest.