Cloudy Kong

door G3dFactory · Hueforge & Lithophane

18 Downloads

17 Likes

4 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Muted Blue Transmission Distance: 0.3PLA PolyTerra Cotton White Transmission Distance: 1.5PLA PolyTerra Muted White Transmission Distance: 0.5PLA PolyTerra Cotton White Transmission Distance: 1.5 Swap Instructions:Start with Charcoal BlackAt layer #11 (0.96mm) swap to Muted BlueAt layer #17 (1.44mm) swap to Cotton WhiteAt layer #18 (1.52mm) swap to Muted WhiteAt layer #25 (2.08mm) swap to Cotton White for the rest.Enjoy