Coldplay - Parachutes

Coldplay - Parachutes For more fanart filament paintings check out out my profile → https://makerworld.com/en/@Noahs_A_NoobiePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.42mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments (IGNORE IF USING AMS)Printer will automatically stop at each filament swap pointSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest.