Collapsable Tripod

I needed a small tripod and I didn't like any of the ones I found so I did what I do and spent too much time making my own design.

The base is about 11" diameter when spread out and about 4" diameter when compacted. The nuts are captured along with the 1/4-20 mounting bolt. The bolts needed for the legs are m5-.80 x 30. You will need 3 of those along with 3 lock nuts. I used a 1.5" long 1/4-20 for the mount.

Obviously print 3 legs and 1 center piece. I used 4/4/4 walls/top/bottom along with 36% infill.