Column Clock

0.16 layer height 200c extruder60c bed35 mm/s This is the result of many hours of daydreaming over a sleek compact desk clock. I have always liked the idea of unique takes on traditional items and wanted to see how far I could take the concept of a clock without having to design my own movement. I designed this clock to be covered, but I understand others may like it without. For this reason, I've included an optional base that can be used without the glass. I also used a clock movement that I had purchased in the past, but any movement that is 2 ¼ x 2 ¼ x 5/8 inches with a 5/8 x 5/16-inch diameter shaft should work. In case of any variation in parts I have included a step file for easier editing and remixing. Supports should only be needed if you’re printing the base to be used with the glass. I designed in supports for the columns to achieve better results in the numbers. These can be clipped out using side cutters if need be, but I recommend using a heated hobby knife if availab