Thingiverse
Commodore 64 Joystick
di dan188
8
Download
2
Likes
0
Makes
There are 2 joystick top parts:
- One for sanwa type joysticks with 45mm mounting holes.
- One for joysticks with 32mm mounting holes.
You will need 4: 3mm x 30mm screws for the joystick and small 2mm screws for the cable clamps and connector cover.
If you use a female db9 connector, you might have to file a tiny bit off the sides, as I have made the connector covers the widest they could be while still allowing 2 joysticks to fit in the c64.
The holes for the buttons are 24mm.
- One for sanwa type joysticks with 45mm mounting holes.
- One for joysticks with 32mm mounting holes.
You will need 4: 3mm x 30mm screws for the joystick and small 2mm screws for the cable clamps and connector cover.
If you use a female db9 connector, you might have to file a tiny bit off the sides, as I have made the connector covers the widest they could be while still allowing 2 joysticks to fit in the c64.
The holes for the buttons are 24mm.
dan188 pubblica anche su
8 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
