CR-10 Complete Cable Chain

IMPORTANT : 2019-07-22
While running the printer constantly with nozzle at 230C, it slowly heats up the terminal block on the hotend heater connection, don't connect your heater through the terminal block use JST connectors instead with higher power rating.

All axis cable chain mod for CR-10

Get chains here: https://www.thingiverse.com/thing:3377296

Use ABS or PETG, PLA will work but may easily deform especially when enclosed

10 pin terminal block : https://www.pololu.com/product/2499

Chain segments and connection order:
X-axis : 1x segment_8e1, 11x segment_8z, 13x segment_8n, 1x segment_8e2
Y-axis : 1x segment_8e1, 14x segment_8n, 1x segment_8e2
Z-axis : 1x segment_15e1, 3x segment_15n, 5x segment_15z, 9x segment_15w, 5x segment_15z, 3x segment_15n, 1x segment_15e2

Notes:
Remove sleeve for sections of the cable that goes into the chain
See Y-axis cable rewiring here: https://www.thingiverse.com/thing:2607148
Requires longer cables for x and z

https://youtu