CR-10 mounted to Ormerod 2

# Note:
This is no actual thing but I wanted to share it here anyway.


After a view years of use and experiencing several problems with the original printed extruder (filament stuck, missing steps and the bowden tube came off several times,...) i decided to replace the extruder with a new one.


* I choosed the CR-10 extruder in the aluminium version (about 15€).

* The extruder is mounted at the top of the Z-axis aluminum extrusion using 2 M4 standoff-screws (see picture for details)

* The extruder has no big gear so the Extruder steps per mm have to be adusted accordingly.

# How to calculate the extruder steps per mm
* The default setting for the CR-10 extruder on creality printers seems to be 95. This is the default setting to start off:M92 E95 ; Set extruder steps per mm

* Choose a fixed reference point on the extruder for your measurements (I used the exit connector for the bowden tube). Do not connect the bowen tube yet - otherwise you can't see your marks!