Creality K1 Max Bed Cable Strain Relief

### Bed Cable Strain Relief for Creality K1 Max

Absolutely necessary if you have installed this mod: https://github.com/cryoz/K1_tenso_manual/blob/main/README_ENG.md

Uses 3 small size zipties to hold the cable in place. Allows to create a small loop near the bed to fpurther offload any tension in the cable to prevent it from affecting tenso sensors readings.

Installation requires removal of the ziptie holding the cable under the bottom cover (the one closest to the exit from the bottom) and moving the cable to be more straight (see photo), as well as removal of the ziptie holding it to the cable channel. After that, the cables need to be pulled out to have the most extra length available where the loop would be. The zipties holding the two cables together may need to be re-installed.

====

### Альтернативное крепление кабелей для Creality K1 Max

Крайне важная модификация, если вы модифицировали тензодатчики по этой инструкции: https://github.com/cryoz/K1_tenso_manual