Creatbot DX2 Panels Fixators

My working printer - Creatbot DX2 - is very similar in parameters and appearance to the MANKATI FULL SCALE XT PLUS. In both, the fastening of the front and side acrylic transparent panels is made by inserting the heads of the M4 screws into the corresponding oval-shaped holes in the steel case of the printer. This is inconvenient and when the printer is working the panels that are fixed in this way jingle slightly. I found a model of fixator for MANKATI (https://www.thingiverse.com/thing:1459696) on Thingiverse and remade it for Creatbot. Printed from ABS. In the holes of the fixator part after printing I cut the thread M4. Used screws - M4x14 with a large (10,5 mm) heads. Work fine!