Cryptex-X

A cryptex with ten code rings of your choice.

Needed Parts:
Sanding paper
Super Glue

Printing:
Print End_Plug_Lock.stl, End_Plug_Shaft.stl, 2 x End_Plug_Ornament.stl, Lock.stl, Lock_Ring.stl, Code_Ring_Shaft.stl and 10 code rings of your choice.
Code_Ring_Shaft.stl could benefit of being printed in a stronger material then PLA.
All parts can print without support if placed as the STL files suggests.

Assembly:
Please test assemble without glue first, to ensure all parts goes together. Some grinding may (will) be needed....
1. If the clicking, when turning the code rings seams a bit weak, carefully heat the springs on the Code_Ring_Shaft, and bend them a bit out.
2. Glue 'End_Plug_Shaft' to 'Code_Ring_Shaft'.
3. Mount the code rings on the 'Code_Ring_Shaft'.
4. Glue 'Lock_Ring' to 'Code_Ring_Shaft'.
5. Put the 'Lock' into 'Code_Ring_Shaft' and turn the rings.
6. Place the 'End_Plug_Lock' on the table, and glue it to the 'Lock'.
7. Glue the two 'End_Plug_Ornament' to