the cube · drawer module

the cubedrawer modulemodern minimalist drawer module design inspired by the cube moviefull dimensions in mm ~ x:200 · y:200 · z:2000.28mm layer height10% cubic infillthis design takes about 1.5kg of filament and quite a few hours of printing, it's designed to be robust and have a “heavy” presence, therefore I did not approach it with a filament saving mindset (thinner walls, grids, etc)also the tolerances are relatively tight, therefore cannot guarantee that if you scale it down that the drawers will slide in properly, so I don't recommend scaling it down. Another important consideration is to make sure that you have proper bed adhesion as to not have any lift, therefore i recommend using 3DLAC to ensure everything stays nice and flat notesincludes bambu studio 3mf file and STLsall photos uploaded are of the actual printed model, and are copyright protectedif you enjoy this model please consider to https://www.buymeacoffee.com/h3li0commercial licence membership available on my patreon.com/h3li0