Cuddly Cat

Took a pic of my wife and our cat Stella, animated it using Pixar vibes, and then setup the print! If you want to re-size, do not adjust the Z height, as the filament swap are layer specific. Also, these colors were based on what I wanted, but can be swapped for other colors no problem, although play with the colors before printing. The layer 20 will be the cat/human part, so be mindful of color selection Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm #080a0d PLA BambuLab Matte Black Transmission Distance: 0.3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #bb3d43 PLA BambuLab Matte Red Transmission Distance: 1.5 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 5 unique filamentsSwap Instructions: Start wi