Customizable Display Box

This customizable 3D model is a box with a hinged lid that opens to create a vertical display case for small items or lays flat to form a work tray.AssemblyThere is some assembly required. The model includes all the parts as printable objects.Step 1: Identify the pieces printed on the third plate. Note that the model includes 2 extra lock clips, in case they break or get lost.Step 2: Insert the short pins into the ends of the flat bars, and insert the long pins into the ends of the raised bars. The print should have enough tolerance for them to fit without much force. They can be sanded or trimmed with a knife if they are too wide.Step 3: Insert the pin on one end of the flat bar into the hole in the lower corner of the lid as shown. Slide on a lock clip to hold the pin in place. The bar should rotate freely. Repeat on the other corner of the lid with the other flat bar.Step 4: Insert the pin on one end of the raised bar into the innermost hole on the hinge tab on the box as shown. Not