Thingiverse

Customizable easy shelf side bracket

von SkikoVienna

22 Downloads

13 Likes

0 Makes

I needed small brackets for mounting a shelf over my toilet. To avoid hitting the pipes during drilling I went for side brackets mounted on the left and right wall. Mounted on brick walls with 5 mm wall plugs (Dübel) the brackets feel really secure holding a 80 cm board. I didn't design for securing the board with screws as the board is a tight fit between the side walls. If needed it would easily possible to adapt the design for more screws into the wall or board.

I printed the brackets smaller then the board so they are nearly invisible below it.

Befestigungswinkel Bookshelf bracket corner bracket Montagewinkel regal shelf shelf bracket wandhalter wandregal Befestigungswinkel Bookshelf bracket corner bracket Montagewinkel regal shelf shelf bracket wandhalter wandregal

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Customizable easy shelf side bracket

Ähnliche Modelle

Zur Sammlung hinzufügen