Customizable Key Holder

Customizable Key HolderWhile I was browsing older files on thingiverse, I found the Proteus Key Holder by ProteanMan. I decided that I wanted to make my own with a few extra features.Files to DownloadThe 3mf file contains three plates, one contains both the bases, the other 2 contain both the hex and normal inserts. You will have to print the plate with the bases and one of the two insert plates. If you wish to either download spacers or make some modifications to the parts, STL files are also provided. For the spacers, you can scale the 1mm spacer provided to whatever height you need or use the two spacers I used for the pictured model. PrintingIf not using the 3MF file, the orientation you place the parts in may require support.For material, PLA should be fine, but making the base out of PETG should increase the life of the parts. The one I printed was made with PolyLite Black PETG and PolyTerra Army Red PLA and has been in use for 5 years without issue.Parts3 x M3 screws (Length app