Thingiverse

Customizable Protective Grid

by micromachine

64 Downloads

53 Likes

0 Makes

I just needed some protection for the drainage, so I have designed a simple grid based on the standard model. It's simple to print, in PLA or ABS, no support or anything needed, in .35 mm printed in around 2,5 hours.

There are two dimensions available, 120 or 140 mm and one 140 mm reinforced a little bit. Different size you can customize of course.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS

Est. print time

5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Customizable Protective Grid need supports when printing?

No supports needed for Customizable Protective Grid — it's designed to print clean off the bed.

How long does it take to print Customizable Protective Grid?

According to the design notes, Customizable Protective Grid takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Customizable Protective Grid available in?

Customizable Protective Grid is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Customizable Protective Grid free to download?

Yes, Customizable Protective Grid is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Customizable Protective Grid

Add to Collection