Customizable Soprano Ukulele - outdated

https://www.thingiverse.com/thing:6601706 Here is a link to V2.0 with new sound-hole and bridge placement/. I wont be supporting 1.0 anymore.

This is a Soprano ukulele I designed to be easy to print and assemble. No glue required for easy repair. I plan on adding new body types and maybe a calibration test piece. Updates down below.

Parts list:

1 x Neck
1 x body
1 x nut
1 x bridge
1 x 6mm x 300mm steel rod
1 x M3 x 16mm screw bolt
1 x M4 x 16mm screw bolt
4 x M1.7*6 self tapping screws
1 set of ukulele tuning pegs with screws ( I recommend this: https://www.amazon.com/dp/B00EQ2ABD4 Not an affiliate link)

How to print: Use supports on the neck and bodies. You might not need supports for the box style body.

How to assemble:

1. Remove all the support material
2. Attach the nut to the neck and use 2 screws to hold it in place.
3. Attach the bridge to the body and use 2 screws to hold in place.
4. Do a test fit to see if th