Cutaway Lock

This is my design of a cutaway pin tumbler lock where you can see the inner mechanism.

Instructions:
Print the core, body, clip, and lid.
Note that You will need some supports when printing all these parts except for the clip. If you are unsure how to use supports use the default full supports settings of your slicer.

The lock uses 9mm diameter pins. The key pins are marked A,B,C,D,E according to the length A being the shortest and E the longest. Print as many as you need according to the key. I have provided several key options each marked with the pin combination for that key. You can use the lock simulator (see link at the end) to generate any key combination. Note that because of MACS you cannot have AE or EA combinations.

You have 5 options for driver pins. I chose the most common drivers models. Print as many of each as you want.

Springs: The lock uses 9mm x 35mm x 0.5mm springs, they are readily available on Chinese websites such as Aliexpress. I would not recommen