Dan Da Dan - Momo Hueforge

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm #000000 PLA Deeplee Black Transmission Distance: 0.2 #1f3f9d PLA Forshape+ Blue Transmission Distance: 2.5 #744842 PLA Deeplee Brown Transmission Distance: 1.8 #ffffff PLA Deeplee White Transmission Distance: 4.7 #d70610 PLA Forshape+ Red Transmission Distance: 3.6 #f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1 #ffc2f2 PLA Deeplee Pink Transmission Distance: 4.4 This print uses 7 unique filaments Instructions de changements: Commencer par Black At layer #12 (1.04mm) swap to Blue At layer #14 (1.2mm) swap to Black At layer #15 (1.28mm) swap to Brown At layer #17 (1.44mm) swap to White At layer #19 (1.6mm) swap to Red At layer #24 (2