Dargon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 106.67x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PLA BambuLab Basic Jade White Transmission Distance: 6 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Gray At layer #25 (2.08mm) swap to Jade White At layer #33 (2.72mm) swap to Red for the rest.