Thingiverse
day light
par sirmatix96
2
Téléchargements
1
Likes
0
Makes
Hello :)
This model was created specially for second light to the electric scooter -xiaomi m365/m365 PRO.
Probably will fit to many other vechicles like other type of electric scooters and bikes.
To screw it all in one piece you will need :
-2x M4x30mm with 2x extend pads, 2x spring pads.
- 4x hexagon nuts to mount bottom of this to the wing. Two of the nuts you are mounting inside of sockets dedicated to use to "block" screws in bottom side of the housing, other two you will need to use with pads as the direct mount in down side of wing.
- 4x wooden screws M3 for PH2/PZ2 screwdriver with length something about 16mm to conect bottom with top elements.
- 1x LED model 009604 which you will find more informations in referal photos :)
I have connected this lamp with back light, so in the moment when im braking this light is pulsing too, however you can also connect it via some button and fuse direct to the battery inside electric scooter- first cells have 4,5V and y
This model was created specially for second light to the electric scooter -xiaomi m365/m365 PRO.
Probably will fit to many other vechicles like other type of electric scooters and bikes.
To screw it all in one piece you will need :
-2x M4x30mm with 2x extend pads, 2x spring pads.
- 4x hexagon nuts to mount bottom of this to the wing. Two of the nuts you are mounting inside of sockets dedicated to use to "block" screws in bottom side of the housing, other two you will need to use with pads as the direct mount in down side of wing.
- 4x wooden screws M3 for PH2/PZ2 screwdriver with length something about 16mm to conect bottom with top elements.
- 1x LED model 009604 which you will find more informations in referal photos :)
I have connected this lamp with back light, so in the moment when im braking this light is pulsing too, however you can also connect it via some button and fuse direct to the battery inside electric scooter- first cells have 4,5V and y
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
